Mounted windscreen temporarily, fits well. The time I spent on bending the canopy rails has paid off. Mounted and trimmed Skylight overlap with the aft fuselage skin. Found out that the front edge and rear edge of the skylight blank are not parallel, so I trimmed rear edge with reference to front edge, everything came out fine.
Removed the protective plastic from the skylight where the ribs are located. I am curious why Rans only called out these areas, so I just followedthe instructions— I will remove more later on.
Mounted the bits joining the windscreen and skylight, ready for drilling. This assembly would be easier with two people- one on the inside, one outside